Sealing Solutions for Production & Intervention Systems - Trelleborg

Sealing Solutions for Production & Intervention Systems

Optimizing oilfield application performance


Trelleborg Sealing Solutions can offer the optimum seal type and material for a variety of oil and gas production and intervention applications to maximize life and performance of the sealing system.

Our application experience is vast, and below are a small number of typical applications where Trelleborg Sealing Solutions have proven performance:

BOPs

Blow Out Preventers

Potential Sealing Requirements

  • High sealing capability
  • Withstand high pressures
  • Wide operating temperature range
  • Rapid Gas Decompression (RGD) Resistant

Connector Seals

Potential Sealing Requirements

  • High sealing capability
  • Withstand high pressures to 30,000 psi / 207 MPa*
  • Extreme temperature resistance

Downhole and Intervention Tools

Potential Sealing Requirements

  • High sealing capability
  • Withstand high pressure
  • Resistant to corrosion and abrasion

Fishing Tools

Fishing & Jar Tools

Potential Sealing Requirements

  • High sealing capability
  • Withstand high pressures
  • Resistant to impact and abrasion
  • Media resistant

FCE

Flow Control Equipments - Ball Vavles and associated devices

Potential Sealing Requirements

  • Operate at temperatures from -94°F to +392°F / -70°C to +200°C
  • Withstand high pressures to 15,000 psi / 103 MPa
  • Rapid Gas Decompression (RGD) resistance
  • Excellent media resistance
  • Conforms to NORSOK standard

FPSO Swivels

Potential Sealing Requirements

  • Suitable for dynamic rotary movement
  • Withstand high pressures
  • Low friction
  • Large diameters

Gas Lifts

Potential Sealing Requirements

  • High sealing capability
  • Withstand high and low pressure
  • Rapid Gas Decompression (RGD) resistance

Offshore Hydraulics

Offshore Topside Hydraulics

RST

Reservoir Sampling Tools

Potential Sealing Requirements

  • Operate at temperatures up to +572°F / +300°C
  • Withstand high pressures to 30,000 PSI / 207 MPa*
  • Good abrasion resistance
  • Excellent media resistance

Risers & Compensators

Potential Sealing Requirements

  • Low friction
  • Abrasion resistant
  • Suitable for a splash zone cylinder environment